Boat types
Boat Flooring for Pontoons, Fishing Boats and Yachts
Our marine flooring for boats works on any hull with a flat, clean deck: fiberglass, aluminum or sealed plywood. We cut flooring boat by boat from your template, so the kit drops into place with no trimming on site.
Pontoon boat flooring
Large deck areas cut into panels that follow the furniture and fence lines. Flooring for a pontoon boat is usually 6 mm two-color sheet with a brushed faux teak surface. This pontoon flooring replaces carpet on the whole deck, and pontoon boat decking with grooves hides the panel joints, so pontoon decking looks like one piece.
Bass and jon boat flooring
Casting decks, hatch lids and walkways. Jon boat flooring is often 5 or 6 mm, glued straight onto aluminum or sealed plywood to make a quiet, grippy deck for fishing. Closed-cell EVA is the right foam for boat deck areas that are always wet.
Center consoles and fishing boats
Cockpit floors, gunwale pads, cooler tops and a helm pad at the wheel. A firmer 60–65 Shore C grade stands up to boots and tackle.
Yacht flooring
Swim platforms, transom steps and side decks. Yacht flooring kits often use lighter colors and logos or boat names routed into the swim platform.
Replacing boat carpet with EVA foam
Changing boat carpet for EVA foam boat flooring is one of the most common refits. Closed-cell EVA does not soak up water, so it does not rot, smell or grow mildew the way marine carpet does, and it stays cooler under bare feet. Pull the old carpet, clean the deck, then press the 3M-backed pads into place. The same EVA boat flooring also works as boat floor matting in cabins and cockpits.
EVA boat matting is a foam floor boat owners can hose down, walk on barefoot and fish from all day.
Pads
Helm Pads, Swim Platform Pads and Cooler Pads
Not every boat needs a full deck. These boat deck pads use the same boat EVA foam as our full kits and are cut from your template or ours.
Helm pad
A thicker standing pad at the wheel that takes the strain off your legs on long runs. Standard helm pad: 13 mm, 1000 × 400 mm; other sizes cut to order.
Swim platform and transom pads
A boat swim platform pad gives a grippy, cushioned surface where people climb aboard wet. Boat step pads and ladder pads are cut to the same pattern.
Kayak, jet ski and surfboard traction pads
The same foam makes kayak deck pads, jet ski pads and surfboard traction pads. We cut them in small runs with your shape, color and texture, and they can share an order with your boat flooring.
Faux teak decking
Faux Teak Decking, Patterns and Colors
Faux teak decking is two layers of EVA in contrasting colors. The top layer is brushed to a wood-like grain, then grooves are routed through it so the bottom color shows as the caulking line. That is why synthetic teak decking for boats looks like real teak decking for boats, without the weight, oiling or splinters.
Surface patterns
- Brushed faux teak with grooves
- Brushed, no groove
- Diamond
- Honeycomb / hexagon
- Fractal
- Stone texture
- Camo embossed
Edges come square or beveled. Logos, boat names and numbers can be routed or laser-engraved into any pattern.
Two-color combinations
- Teak / Black
- Light Teak / Black
- Grey / Black
- Mocha / Black
- Brown / Black
- Beige / Sand
- Grey / Blue
Swatches are approximate. Camo and any Pantone color are made to order, and three-layer builds are available. We send physical color samples free of charge.
Why EVA instead of real teak
EVA foam boat decking replaces real teak on many boats. Real teak boat flooring is heavy, needs regular oiling and turns grey in the sun. Artificial teak decking in EVA weighs a fraction as much, is cut to shape in the factory and is glued down with 3M adhesive instead of screws, so this fake teak decking leaves no holes in the deck.
Specifications
EVA Foam Boat Flooring Specifications
These specifications cover our boat deck flooring, boat floor foam and boat decking foam in kits and sheets. Every value below can be changed for your order. If you need a size or thickness that is not listed,
ask us for a custom build
.
| Material |
Closed-cell EVA foam |
| Build |
Two layers in contrasting colors (standard); three layers available |
| Deck thickness |
3 mm; 5 mm; 6 mm (3 + 3 mm two-color); 8 mm (3 + 5 mm two-color); 10 mm;
custom thickness
|
| Helm pad |
13 mm, 1000 × 400 mm standard;
custom size
|
| Sheet size |
2400 × 1200 mm; 2400 × 900 mm; 2100 × 1100 mm; or cut to your template |
| Surface |
Brushed faux teak with grooves, brushed no-groove, diamond, honeycomb, fractal, stone texture, camo embossed |
| Edges |
Square or beveled |
| Backing |
3M 9775WL or 3M 99786 adhesive, laminated onto a primed surface; 3M batch numbers on request. Or no adhesive. |
| Density |
Matched to the hardness grade |
| UV resistance |
Passed a 3,000-hour UV aging test |
| Water |
Closed cells; does not absorb water |
| Lead time |
About 15 days for standard sheets; about 35 days for custom-cut or engraved kits |
| Samples |
Free; pre-production sample before every bulk order |
Hardness grades
Hardness sets how the floor feels underfoot and how well it wears. Tell us how the boat is used and we will suggest a grade.
| Hardness |
Feel |
Typical use |
| 50–55 Shore C |
Softer, most cushioned |
Barefoot comfort; common for retail and DIY sheets |
| 55–60 Shore C |
Balanced |
General boat decking |
| 60–65 Shore C |
Firmer, more wear-resistant |
Premium boat brands and heavy-wear decks |
| 70 Shore C and up |
Hard board |
Fish cutting boards and bait stations |
Non-slip boat flooring, wet or dry
EVA foam is naturally non-slip: the closed-cell surface grips bare feet and deck shoes even when wet, so this non slip boat flooring needs no grit or paint. Boat flooring non slip performance comes from the foam itself, not from a coating that wears off. Grooves and textures add channels that shed water, which makes it a practical boat non skid flooring, marine non skid flooring and non slip marine flooring for swim platforms and casting decks.
Custom boat flooring
How We Make Custom Boat Flooring
Custom boat flooring starts with the shape of your deck. Send us what you have; we turn it into a CAD drawing and you approve it before anything is cut.
-
Send a template, approve the CAD
Send a DXF or CAD file, a cardboard or clear-film template traced on the deck, or photos with key measurements. We draw every piece and you approve the drawing.
-
Brush the surface
The top color is brushed to a fine wood-like grain, or embossed with diamond, stone or camo texture.
-
CNC routing or laser engraving
Grooves, outlines, logos and boat names are routed by CNC or engraved by laser through the top color.
-
Clean and prime
The back of each sheet is vacuumed and primed so the 3M adhesive bonds to the foam and stays bonded.
-
Laminate 3M adhesive
3M 9775WL or 3M 99786 adhesive is laminated on by machine for even pressure with no air bubbles.
-
Check and pack
Each piece is checked against the approved drawing and packed flat in cartons or on pallets.
Packing and lead time
Packing, Lead Time and Shipping
Standard sheets ship in about 15 days; custom-cut or engraved kits in about 35 days. Everything ships flat, FOB Xiamen, with CIF and DDP on request.
-
Wrapped bundle
Sheets wrapped together in single carton
-
Single-piece cartons
One kit or pad per labeled carton
-
Kraft-paper bundle
Flat bundle, strapped for export
-
Palletized in the container
Cartons strapped and film-wrapped on pallets
Own factory since 1982
50 foaming lines in Jinjiang, Fujian; the foam, brushing, routing and lamination are all done in-house.
Authorised 3M Converter
Genuine 3M adhesive with batch traceability; ISO 9001, ISO 14001, ISO 45001 and BSCI.
Quote within one business hour
Free samples and a pre-production sample before every bulk order.
FAQ
EVA Foam Boat Flooring FAQ
Answers to the questions boat builders, dealers and installers ask us most.
What is EVA foam boat flooring?
EVA foam boat flooring is a closed-cell foam mat glued onto a boat deck in place of carpet or paint. Like other marine flooring, it has to cope with water, sun and salt. EVA foam decking for boats is usually two layers of EVA in contrasting colors with a brushed faux teak surface and 3M adhesive on the back, cut to fit each part of the deck.
Is EVA foam good for boat flooring?
Yes, EVA foam for boats is one of the best flooring materials because its closed cells do not absorb water. It does not rot or grow mildew, stays comfortable under bare feet, is non-slip when wet and weighs far less than teak.
Can I replace my boat carpet with EVA foam flooring?
Yes. Remove the old carpet and glue, clean and dry the deck, then press the 3M-backed EVA pads into place. Replacing boat carpet this way works on fiberglass, aluminum and sealed plywood decks.
Do you make pontoon boat flooring?
Yes, pontoon boat flooring is one of our main products. We cut large panels to your deck layout, usually in 6 mm two-color sheet with faux teak grooves.
What thickness should I choose for my boat?
Most decks use 5 or 6 mm. Choose 8 or 10 mm for more cushion on standing areas, and 13 mm for a helm pad. 3 mm suits small pads, hatch lids and thin trim pieces.
Which hardness is right for boat decking?
55–60 Shore C suits most boat decking. Choose 50–55 Shore C for a softer barefoot feel, 60–65 Shore C for fishing boats that see heavy wear, and 70 Shore C or harder for fish cutting boards.
Is EVA foam boat flooring slippery when wet?
No, EVA foam stays grippy when wet. The closed-cell surface holds bare feet and deck shoes without grit or non-skid paint, and the grooves let water drain away.
How do you make a custom kit for my boat?
Send us a DXF or CAD file, a cardboard or clear-film template, or photos with key measurements. We draw the kit in CAD, you approve the drawing, then we route, back with 3M adhesive and pack the kit.
Can you add a logo or boat name?
Yes. Logos, boat names, numbers and patterns can be routed by CNC or engraved by laser through the top color, so the bottom color shows the design.
Can I buy plain sheets and cut the flooring myself?
Yes. Full sheets with or without 3M adhesive are covered on our
marine EVA foam sheet page
, including bulk and full-container orders.
What is the lead time, and are samples free?
Standard sheets ship in about 15 days and custom-cut or engraved kits in about 35 days, FOB Xiamen. Samples are free, and we make a pre-production sample before every bulk order.
Get a Quote for Your Boat Flooring
Send your template or photos, the boat model, thickness, colors and quantity, plus your destination port. We reply within one business hour and send free samples.
Email [email protected]