Boat Decking Material: Marine EVA Foam Sheet

Closed-cell EVA foam sheet for boat and yacht decking: boat flooring material, boat floor material and marine decking material, sold to decking fabricators, boat builders and marine retailers. Faux-teak brushed surface, two- or three-layer colour builds, and genuine 3M adhesive backing on a pre-coated surface, with batch traceability. Made in our own plant since 1982.

Sheet for your own cutting — you cut and route the pads; or we cut to your template
Faux-teak and other textures — brushed teak lines, plus 2-layer and 3-layer colour builds
3M adhesive backing — 3M 9775WL or 3M 99786 on a pre-coated surface, with the 3M batch number and report
3,000-hour ageing test — test report available; built for sun, salt water and foot traffic
Czas realizacji — about 15 days from stock, about 35 days made to order; free samples

Poproś o darmowe próbki See specifications

Three marine EVA foam decking sheets with brushed faux-teak texture in sand, brown and grey — Brushed faux-teak EVA sheet in sand, brown and grey.

Stacks of coloured EVA foam sheets in black, pink, purple and grey outside the SANSD factory in Jinjiang — EVA foam sheets at our plant in Jinjiang.

What Marine EVA Decking Sheet Is

Marine EVA decking sheet is a closed-cell ethylene-vinyl acetate foam. Closed cells do not soak up water, so the sheet stays light and does not hold water on deck. The foam is soft and grippy underfoot, wet or dry.

Fabricators buy it as sheet, then cut swim platform pads, helm pads, cooler tops and full deck kits from it. A two-layer build has one colour on top and another below; when you route a line or logo into the top layer, the lower colour shows through. A three-layer build adds a third colour.

The same sheet is used as pontoon boat decking material and pontoon deck material, where large flat decks need a soft, non-slip surface.

Making finished deck pads instead of buying sheet? See our foam boat flooring range.

Genuine 3M Adhesive, Traceable by Batch

The adhesive decides whether a deck pad stays down in sun and spray. We laminate genuine 3M adhesive to the back of the sheet, 3M 9775WL lub 3M 99786 , chosen to suit your deck.

Before laminating, we pre-coat the foam surface so the adhesive wets out fully and bonds evenly across the whole sheet, with no dry spots or lifting edges.

With every order we can give you the 3M batch number of the adhesive used and the supporting report, so you or your customer can check it is genuine 3M. SANSD is an authorised 3M converter.

3M 9775WL
3M 99786
Pre-coated surface
3M batch number
Authorised 3M converter

Black EVA foam sheet with 3M adhesive backing and printed 3M release liner — EVA sheet with 3M adhesive and the printed 3M liner.

Marine Foam Sheet Specyfikacja

Send your current sheet or a pad you want to copy and we match it. These are the options we make.

Materiał	Closed-cell EVA foam
Grubość	3 mm, 5 mm or 6 mm; custom thickness on request
Powierzchnia	Brushed faux teak, smooth, or other embossed textures
Colour build	Single colour, two-layer or three-layer
Colours	Sand, brown, grey and others; matched to your sample or Pantone
Spód	Genuine 3M adhesive (3M 9775WL or 3M 99786) on a pre-coated surface, or no adhesive
Durability	3,000-hour ageing test; report available
Dostarczamy	Full sheet, or cut to your template
Terms	FOB Xiamen; CIF or DDP on request. Free samples
Czas realizacji	About 15 days for stock items; about 35 days for items made to order

Colours and Surface Textures

Colours are built in layers. The name gives the top colour first, then the colour underneath: route a line or logo into the top layer and the lower colour shows through.

Colour combinations

Sand over Black
Light Grey over White
Dark Grey / Orange / Black
Cream over Light Grey
Rose Beige / Black / Light Grey
Light Grey / Aqua / Black
Black over Pink
White over Blue
Amber over Black
Grey over Black
Your Pantone colour

Need a colour that is not shown? Send a Pantone number or a sample and we match it, in a single colour or in two- and three-layer builds.

Faktury powierzchni

Brushed

Fine parallel lines brushed into the surface, the classic faux-teak look. Grippy underfoot, wet or dry.

Embossed

A raised pyramid pattern pressed into the foam for extra grip on swim platforms, steps and helm stations.

Your own embossed pattern

We can emboss other patterns to order, such as diamond, wave or your logo. Send a drawing or a sample and we make a sample sheet for approval.

Ask for a custom pattern

Packing Options for Export

Choose the packing that suits your warehouse and your customers. We quote FOB Xiamen, and CIF or DDP on request.

Single roll of marine EVA foam packed upright in its own brown carton

Single roll, own carton

Each roll is packed in its own carton, ready to ship on to your customer.

Labelled cartons of marine EVA foam sheet stacked on pallets in the SANSD warehouse

25 sheets per carton

Sheets are packed flat, 25 to a carton, with a label on every carton.

Cartons of marine EVA foam sheet on a pallet, strapped and loaded in a shipping container

Cartons on pallets

Cartons are palletised and strapped, then loaded into the container.

Marine EVA foam sheets stacked directly on a pallet, wrapped in stretch film and strapped

Direct on pallet, film-wrapped

Sheets stacked straight onto a pallet and wrapped all round in stretch film, for larger orders.

Marine EVA Foam Sheet — Pytania Kupujących

Adhesive, durability, textures and shipping. Ask us anything that is not covered here.

What is the best material for boat decking pads?

Most foam boat decking is made from closed-cell EVA foam. It does not soak up water, stays soft and grippy underfoot when wet, and can be textured, layered in two or three colours and backed with adhesive.

Do you sell marine EVA foam as sheet or as finished pads?

Both. This page covers sheet for fabricators who cut their own pads. Finished pads and deck kits are on our foam boat flooring page.

Which 3M adhesive do you use?

We laminate genuine 3M 9775WL or 3M 99786 adhesive onto a pre-coated foam surface, so the adhesive bonds fully. With each order we can provide the 3M batch number and the supporting report.

How do I know the adhesive is genuine 3M?

We give you the 3M batch number of the adhesive on your order and the supporting report, so the adhesive can be traced. SANSD is an authorised 3M converter.

How durable is the sheet in sun and salt water?

Our marine sheet has passed a 3,000-hour ageing test, and the test report is available. Closed-cell EVA does not absorb water, so the sheet stays light on deck.

Can you make two-layer sheet for routing logos?

Yes. We make two-layer and three-layer colour builds. When you route into the top layer, the colour underneath shows through, which is how logos and lines are added to deck pads.

Can you match the texture and colour of the sheet we use now?

Yes. Send a sample and we match the texture, colours, thickness and backing, then send a free sample for approval.

What is the lead time for marine EVA foam sheet?

About 15 days for items in stock and about 35 days for items made to order. Samples are free and we quote within one business hour.

Poproś o Wycenę lub Darmowe Próbki

Tell us what you need and we quote within one business hour.

Thickness, or your custom thickness
Texture: faux teak, smooth or other
Single, two- or three-layer colours
3M 9775WL, 3M 99786 or no adhesive
Full sheet or cut to template
Quantity and destination port